Guides · 14 Nov 2026 · Harrods Health Team

Third-Party Manufacturing Glossary for India: 40 Terms Brands Meet

Published by Harrods Health Private Limited, a private label and contract manufacturer in Ambala, Haryana, India. By Hemang Jain, Founder, Anadoris.

Third-Party Manufacturing Glossary for India: 40 Terms Brands Meet – Harrods Health
Quick answer

This glossary defines the words a brand meets when a third-party manufacturer in India makes its products: business models such as loan licence, P2P and job work; regulatory and label terms; quality terms such as COA, BMR and AQL; order terms such as MOQ and overage; and shipping terms such as Incoterms.

This glossary defines the terms a brand meets when a third-party manufacturer in India makes its products, grouped by stage: business models, regulation and labels, quality and testing, orders and production, and shipping. Each definition is short and practical, and links point to the guides that go deeper.

Quotes, contracts and calls with factories are full of shorthand. Misreading one term can change who owns a formula or who pays for leftover stock. Regulatory definitions here are general and simplified; the exact legal meaning can depend on the product and the state, so confirm current rules with a regulatory adviser. For the full process, see the complete guide to third-party cosmetic manufacturing in India.

What do the business model terms mean?

  • Third-party manufacturing: the Indian trade term for a licensed factory making a finished product under its own manufacturing licence for another company to sell under its brand.
  • Loan licence: a licence that lets a company without its own factory manufacture in another licensed manufacturer's premises, using that site's facilities. Ask a regulatory adviser whether it is available for your category.
  • P2P (principal to principal): a deal in which each company acts on its own account: the factory makes and sells finished goods, and the brand buys and resells them.
  • Job work: a GST term for processing goods that belong to someone else. The brand supplies some or all materials and pays the factory a processing charge.
  • Contract manufacturing: a factory making a product to a formula and specification the brand supplies. Often used to mean OEM.
  • Private label: a factory's ready formula, adjusted within limits and sold under your brand. The formula usually stays with the factory.
  • White label: one generic product sold to several brands with only the label changed. No exclusivity.
  • OEM (original equipment manufacturer): in cosmetics, a factory that makes your own formula to your instructions.
  • ODM (original design manufacturer): a factory whose lab develops a new product to your brief. Ownership of the result depends on the contract.
  • Marketer: the brand company that places the product on the market, usually shown on the label after "Marketed by".

The ownership differences are explained in private label vs white label vs OEM vs ODM.

What do the regulatory and label terms mean?

  • Cosmetics Rules 2020: the rules under the Drugs and Cosmetics Act that govern the manufacture, import, labelling and standards of cosmetics in India.
  • State Licensing Authority: the state body that issues cosmetic manufacturing licences for factories in its state.
  • CDSCO: the Central Drugs Standard Control Organisation, the national regulator, which handles matters such as registration of imported cosmetics.
  • Legal metrology: the law on weights and measures. Its packaged commodity rules govern declarations on pre-packed goods such as net quantity and retail price.
  • MRP (maximum retail price): the highest price, inclusive of taxes, at which a pre-packed retail product may be sold, printed on the pack.
  • Net quantity: the amount of product in the pack, declared by weight or volume in standard units.
  • INCI: International Nomenclature of Cosmetic Ingredients, the standard naming system used in ingredient lists.
  • Shelf life: how long an unopened product stays within specification, supported by stability data and shown as a use-before or expiry date.
  • PAO (period after opening): how long a product can be used once opened, shown by an open-jar symbol on many exported products.
  • PIF (product information file): a safety and product dossier required in some export markets, such as the EU and UK, held by the responsible person there.

These terms are simplified. Labelling and licensing rules are amended from time to time, so confirm current rules with a regulatory adviser before you approve artwork.

What do the quality and testing terms mean?

  • Specification: the signed, measurable description of a product: appearance, odour, pH or viscosity where relevant, fill weight and pack. Batches are accepted or rejected against it.
  • COA (certificate of analysis): a document showing that one batch met its specification, issued by the manufacturer's quality team.
  • MSDS or SDS: a material safety data sheet or safety data sheet describing hazards, handling, storage and transport of a material or product.
  • BMR (batch manufacturing record): the record of how a specific batch was made: materials, quantities, steps, checks and signatures. Also called the batch record.
  • Stability study: storing samples under set conditions and testing them over time to support the shelf life.
  • Compatibility test: checking that the formula and the final pack do not affect each other, for example by leaking, staining or swelling.
  • Retained sample: units kept from each batch so the batch can be tested again if a complaint arises.
  • AQL (acceptance quality limit): a sampling method that sets how many defects are acceptable when inspecting a lot.
  • Tolerance: the allowed variation around a target, such as fill weight or the quantity delivered against the quantity ordered.

What do the order and production terms mean?

  • MOQ (minimum order quantity): the smallest quantity a factory will make per product, colour or pack. It depends on the batch size, the materials and the packaging.
  • Bulk: the finished formula before it is filled into packs.
  • Overage: extra quantity added to cover losses, either an ingredient above label level or units made above the order.
  • Artwork proof: the final label or carton design, with all text, sent for written approval before printing.
  • Primary and secondary packaging: the container that touches the product, such as a bottle or tube, and the outer carton or sleeve around it.
  • Shipper: the outer corrugated box that holds a set number of units for transport.
  • Lead time: the time from formula and packaging approval to goods ready for dispatch.
  • Tech transfer: moving a product from one factory to another with its formula, specification, process and test methods.

How MOQ, forecasts and reorders interact is covered in MOQ, forecasting and reorders, what sits behind a unit price in how to read a manufacturing quote, and moving a product between factories in switching manufacturers and tech transfer.

What do the shipping and export terms mean?

  • Incoterms: standard trade terms, such as EXW, FOB and CIF, that set where the seller's costs and risks end and the buyer's begin.
  • Packing list: a document listing the contents, weights and dimensions of each carton or pallet in a shipment.
  • HS code: the customs classification number for a product, used to apply duties and rules at the border.

Which terms are most often confused?

These pairs cause the most misunderstandings in quotes and contracts.

PairFirst term meansSecond term means
Private label vs white labelAdjusted ready formula, made for youSame product for many brands
Third party vs loan licenceFactory's own licenceBrand's licence at factory's site
P2P vs job workBuying finished goodsPaying to process your materials
Manufactured by vs Marketed byThe licensed site that made itThe brand that sells it
Shelf life vs PAOUnopened lifeLife after opening
COA vs BMRBatch passed its testsHow the batch was made
MRP vs unit priceConsumer price on the packPrice the brand pays the factory

How should a brand use this glossary?

  • When a quote uses a term, ask the factory to define it in writing in the quote or agreement.
  • For licence terms, ask whose licence covers the product and confirm it with a regulatory adviser.
  • For commercial terms, check what each one does to formula ownership, material costs and leftover stock.

Where does Harrods Health fit?

Harrods Health Private Limited, Ambala, is a private label, contract and third-party manufacturer of cosmetics, hotel amenities, nutraceuticals and home fragrance. Minimum order quantities are quoted by product and packaging; see MOQ and pricing.

Ready to launch your own product?

Tell us your idea. An account manager replies within 1 business day.

PROJECT INQUIRY